Home Page      Search       Contact Us      Support & Service      Field Service     Vendor Partner    

 

About CalGraph

  Management Team
  Press
  Career Opportunities
  Special Offerings
  Year 2000

 

Support & Service

  By Product
  FAQ's
  Networking Printers
  Self Help
  Customer Service
  Downloads
  MSDS



NOTE:  For Technical Support with any of the products contained on this page, please call one of the following:
For U.S./Canadian technical support/service, please call the CalGraph Call Center at 1-714-578-9292.

Click here for notes related to the DrawingMaster Professional or DrawingMaster Plus

NOTE:  Certain notes listed on this page may refer to the CalComp BBS.  As of April 1, 1998, this service is  discontined. All files previously available from our BBS are now available from our website (http://www.calcomp.com).

DrawingMaster 600
600 dpi Thermal Plotter Model: 53336
DrawingMaster 800
800 dpi Thermal Plotter Model: 53436
& 53436EG
What Driver Should I Use?
What driver to use for your system or application
What driver should be used with a Macintosh
How do I Setup my Plotter and Driver?
Setup AutoCAD 9,10, and 11 - Serial port
Setup AutoCAD 9,10, and 11 - Parallel port
Setup AutoCAD 12 , 13, and 14  (DOS or Windows) - Serial port
Setup AutoCAD 12, 13, and 14 (DOS or Windows) - Parallel port
How Pens are Assigned by an AutoCAD ADI Driver  (versions 10/11 & 12/13)
AutoCAD 12/13 ADI Driver (Non-GUI) Configuration Guidelines
AutoCAD 12/13 ADI driver configuration questions
Setup WIN3.x 907/PCI Vector driver with DrawingMaster 53x36 Serial Port:
Setup WIN3.x CCRF Raster driver with DrawingMaster 53x36 Parallel Port:
Setup Win 95 907/PCI Vector driver with DrawingMaster - Serial port
Setup Win 95 CCRF Raster driver with DrawingMaster - Parallel port
What kind of cable is needed for the plotter
How do I ....
How to communicate with a Macintosh
How to communicate with IBM-PC Compatibles - Parallel port
How to communicate with IBM-PC Compatibles - Serial port
How to use CDCL
How to setup a terminal for OPCOM
How to Output an Internal Test Plot
General Information
External PS RIP (87225EG)
Test page output: Check disk/memory size
What do the DrawingMaster plotters emulate
PCI Configuration Parameters table
Common Part Numbers for DrawingMaster 600/800
Troubleshooting
DrawingMaster Control Panel Errors which require service.
(Problems that cannot be repaired by the user)
Networking
Network information
Networking a CalComp Printer - Tutorial

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DrawingMaster Plus and
DrawingMaster Professional

400 dpi Thermal Plotter Models: 52424 and 52436
Software and Setup Notes
What driver to use for your system or application
What driver should be used with a Macintosh
Setup AutoCAD 9,10, and 11 - Serial port
Setup AutoCAD 9,10, and 11 - Parallel port
Setup AutoCAD 12 and 13 (DOS or Windows) - Serial port
Setup AutoCAD 12 and 13 (DOS or Windows) - Parallel port
Setup Win 3.1x 907/PCI Vector driver with 524xx - Serial port
Setup Win 3.1x CCRF Raster driver with 524xx - Parallel port
Setup Win 95 907/PCI Vector driver with 524xx - Serial port
Setup Win 95 CCRF Raster driver with 524xx - Parallel port
AutoCAD 12/13 ADI driver configuration guidelines
AutoCAD 12/13 ADI driver configuration questions
How pens are assigned in AutoCAD
How to communicate with IBM-PC Compatibles - Parallel port
How to communicate with IBM-PC Compatibles - Serial port
How to use CDCL
Hardware Notes
Common part numbers
What kind of cable is needed for the plotter
What the DrawingMaster plotters emulate
What the DrawingMaster Plus Professional plotters emulate
How to communicate with a Macintosh
How to setup a terminal for OPCOM
Test page output; Plot length accuracy; Plot quality
External PS RIP (87225EG) Test page, disk/mem size
General Notes
PCI Configuration Parameters table
Network information