Common Part Numbers For 20XX Pen Plotters

Note:  The following is a summary of common parts for this product.
       Complete illustrated parts breakdowns (IPBs) of this product
       are available from the CalComp FaxBack Service (714/821-2914).
       Catalog 3 contains the complete list of IPBs for all models.

       For this model, select from the following documents:

          DOC #   # Pages    Description
          =====   =======    ============================================

          3008      14       2024/2036 Plotter
          3009       6       2024/2036 Stand Assy, Config, Pwr cords
  

_________________________________________________________________________


Cable, Serial: 25 pin RS-232 male to 25 pin RS-232 female, straight-thru cable
     10 ft length--------------------------------------11772-0102
     25 ft length--------------------------------------11772-0250

Cable, Serial: Macintosh cable, 8-pin mini-din male to 25-pin RS-232 male
     6 ft length---------------------------------------16623-0011
     12 ft length--------------------------------------16623-0029

Cable, Parallel: Centronics interface cable, 25 pin male to 36-pin male.
     10 ft length--------------------------------------18735-0129
     25 ft length, double-shielded---------------------717960-9

Pinch Roller
     2024----------------------------------------------19556-0016
     2036----------------------------------------------18451-0014

Reticle------------------------------------------------13112-0016

Turret-------------------------------------------------16710-0015

Turret pen caps:
     Black caps for Liquid Ink pens--------------------11320-0018
     Red or Blue caps for all others
         (Liquid Ball, Fiber Tip pens)-----------------18367-0017

Turret spring (Located near pen caps area on turret):
     (Two springs required)----------------------------697280-6

DUST COVERS, STANDS, UPGRADES, OPTIONS, MANUALS:

     Dust Cover----------------------------------------None

     Stand---------------------------------------------N/A

     Memory Upgrade/Parallel port option:
         1 Meg memory and parallel port upgrade--------Not Available
             Note: Many computer stores sell serial and/or parallel in-line
             buffers which would free up the computer sooner. However,this 
             would not be a good choice if they were trying to use the REPLOT
             function on the plotter.             

         2 Meg upgrade (See following note)------------12322-0808
             Note: Must have the 1 Meg upgrade installed to use the 2 Meg
             upgrade. The 2 Meg upgrade is a 1 Meg SIMM chip that connects
             into the 1 Meg board, giving 2 Megs total memory. The 1 Meg 
             upgrade is no longer available.

     Manuals:
         User's Guide----------------------------------M0020-530
         Maintenance Manual----------------------------M0020-160
         Illustrated Parts Breakdown-------------------M0020-350