Win3.x PostScript Driver - CCL600, CCL600ES, CCL1200ES  Parallel Port:
Technical Support Hot Line 1-800-CALCOMP (1-800-225-2667)            Updated: 30 April, 1996
                                                     CCL_WINP.DOC
The Windows 3.1 PostScript driver file (CCL-WIN.EXE for the
CCL600/model 80611; CLES-WIN.ZIP for either the CCL600ES/model 84511
or CCL1200ES/model 85611) may be may be downloaded
from the CalComp Website (http://www.calcomp.com)
The EXE file may be self-extracted by typing at the DOS 
prompt: CCL-WIN.EXE. The ZIP file requires PKUNZIP version 2.04G, available 
from the CalComp BBS (file name PKZ204G.EXE).

Hardware Connection Requirements:
  PC Host Computer with a working parallel port (i.e. lpt1).
  Parallel cable, Centronics connector.
  CalComp CCL 600 printer must be connected to a PC directly for this
  configuration.
  Network systems may require different communication parameter settings.

1. Setup CCL600, CCL600ES, CCL1200ES:
   - Power ON the printer.
   - Install (toner) cartridge, see Users Guide, chapter 2.
   - Load media, see Users Guide, pages 3-6 to 3-9.
   - Select paper size, see Users Guide, page 7-30 for CCL600; 
     page 6-30 for CCL600ES/CCL1200ES.
   - Select PostScript format or Auto. Note: When Sys = Auto, the
     proper language switch commands may need to be sent to the printer to
     change between PostScript, HP-PCL/5 and HP-GL/2 formats. See Users
     Guide, page 7-20 and 7-48 to 7-49 for CCL600; 
     page 6-20 and 6-48 to 6-49 for CCL600ES/CCL1200ES.
   - Configure Banding Comp and Page protect, see Users Guide, 
     chapter 7 for CCL600; chapter 6 for CCL600ES/CCL1200ES.
     Installed RAM      Banding Comp     Page Protect
     16 MB or more          off              on
     Less than 16 MB        on               off
   - Press ONLINE button to place the printer online (ready to print).

2. Setup Windows Driver:
   - Start up Windows.
   - Double click on Control Panel.
   - Double click on Printers.
   - Highlight CalComp CCL 600 on LPTx.
     (If the Windows driver is not installed, Install it now).
   - Choose Connect and select the LPT port (usually LPT1).
   - Choose OK.
   - Select Fast Printing Direct to Port.
   - Choose OK
   - Choose Setup.
   - Choose paper size loaded in plotter, and set the orientation.
   - Choose OK in Setup.
   - Choose Set as default printer.
   - Close Printers.
   - Close Control Panel.

3. Windows application programs:
   - Start up Windows application program.
   - Select the Print function from the File menu.
   - If the CCL 600 is not the currently selected printer look for a
     button called Printer or Select printer that provides a means of
     changing printers.  If the application program does not provide a
     method of changing printer, use the Windows Control Panel/Printers
     function to make the CCL 600 the default printer.

Notes:
1. The maximum imagable area for various medias sizes are described in
   the Users Guide, pages 3-9 and 3-13.
2. Some CAD programs may require establishing custom paper sizes.