WIN95 907/PCI Vector driver with Pacesetter Parallel Port:
Technical Support Hot Line 1-800-CALCOMP (1-800-225-2667)            Updated: 8 Sep, 1997
                                                      20_W95_P.DOC
The Windows PCI/907 driver file (WIN95VEC.EXE) may be downloaded from the Web Site 
(http://www.calcomp.com)  Self-extract the files by typing at the DOS prompt: WIN95VEC

Hardware Connection Requirements:
  PC Host Computer with a working parallel port (i.e. LPT1).
  Parallel cable, Centronics connector.
  CalComp 20xx Plotter must be connected to a PC directly for this
  configuration.  Network systems may require different communication
  parameter settings.

1. Setup PaceSetter (2024, 2036):
   - Power ON the plotter.
   - Install pen(s) in turret and place turret in the Pacesetter.
   - Load media.
   - Make sure both pinch rollers are down.
   - Press MENU button.
   - Press DOWN arrow key 7 times, set ORIENTATION on AUTO.
   - Press DOWN arrow key 4 times, set PLOT LIMITS on NORMAL.
   - Press DOWN arrow key, set PLOT MANAGER on YES.
   - Press DOWN arrow key, set PORT TYPE on CENTRONICS.
   - Press DOWN arrow key, set PROTOCOL on PCI.
   - Press DOWN arrow key, set SYNC # EOM CHK on C: 2, 1, 3, OFF.
   - Press DOWN arrow key 3 times, save the settings on USER # (1 to 3).
   - Press ONLINE button twice. The plotter should display: ONLINE 000:00.

2. Setup Win95 driver:
   - Start up Windows 95.
   - Click on the START button, click on SETTINGS, click on Printers.
   - Click on the CalComp 907 printer/plotter driver. (If the
     Windows 95 907/vector driver is not installed, install it now by
     selecting Add Printer, then Have Disk".  Enter the path that points to
     the disk directory where the Windows driver is located. Then
     follow the menu choices, selecting the CalComp 907 printer/plotter 
     driver. If the setup program indicates that the driver already  exists, 
     select Replace the Driver. When installation is done, click on
     the CalComp 907 printer/plotter driver).
   - Click on Set as Default from the File Menu Bar in the Printers window.
   - Click on Properties from the File Menu Bar in the Printers window.
   - Click on the Details tab.
   - Select the LPT port that the plotter is connected to. (Default = LPT1).
   - Choose Setup.
   - Choose the appropriate CCP Pacesetter 20xx model in the
     Select Printer field.
   - Choose paper size loaded in plotter.
   - Choose Assign Pens.
   - Assign screen colors to pen turret position numbers.
   - Choose OK in Pen Assignments.
   - Choose OK in Setup.
   - Choose OK in the Properties Window.
   - Close Printers.
   - Start Windows application and print to the CalComp plotter.