Win95 PostScript  Driver - CCL 600, CCL600ES, CCL1200ES  Parallel Port:
Technical Support Hot Line (800) 225-2667               Updated: 3 May, 1996
                                                        CCL_W95P.DOC
The Windows CCRF/PS driver file (WIN95DRV.EXE), may be downloaded 
from the CalComp Website (http://www.calcomp.com). Self-extract the file by typing at the DOS prompt: WIN95DRV. The README.TXT file contains 
the necessary setup information.

Hardware Connection Requirements:
   PC Host Computer with a working parallel port (i.e. lpt1).
   Parallel cable, Centronics connector.
   CalComp CCL 600 printer must be connected to a PC directly for this
   configuration.
   Network systems may require different communication parameter
   settings.

1. Setup CCL600, CCL600ES, CCL1200ES:
   - Power ON the printer.
   - Install (toner) cartridge, see Users Guide, chapter 2.
   - Load media, see Users Guide, pages 3-6 to 3-9.
   - Select paper size, see Users Guide, page 7-30 for CCL600; page 6-30
     for CCL600ES/CCL1200ES.
   - Select PostScript format or Auto. Note: When Sys = Auto, the
     proper language switch commands may need to be sent to the printer to
     change between PostScript, HP-PCL/5 and HP-GL/2 formats. See Users
     Guide, page 7-20 and 7-48 to 7-49 for CCL600; page 6-20 and 6-48 to 6-
     49 for CCL600ES/CCL1200ES.
   - Configure Banding Comp and Page protect, see Users Guide, chapter
     7 for CCL600; chapter 6 for CCL600ES/CCL1200ES.

     Installed RAM       Banding Comp     Page Protect
     16 MB or more          off               on
     Less than 16 MB        on                off

   - Press ONLINE button to place the printer online (ready to print).

2. Setup Win95 driver:
   - Start up Windows 95.
   - Click on the START button, click on SETTINGS, click on Printers.
   - Click on the appropriate CalComp CCL 600 driver. (If the Windows
     PostScript raster driver is not installed, install it now by selecting
     the Add Printers icon on the Printers window and following the menu
     selections from the ADD PRINTER WIZARD. When installation is done,
     click on the START button, click on SETTINGS, click on Printers, and
     click on the CalComp CCL 600 driver).
   - Click on Set as Default from the File Menu Bar in the Printers window.
   - Click on Properties from the File Menu Bar in the Printers window.
   - Click on the Details tab.
   - Select the LPT port that the plotter is connected to. (Default = LPT1).
   - Click on the Paper tab at the top of the Properties window.
   - Choose the paper size and orientation loaded in the printer.
   - If connecting to a network: select the Capture Settings tab at
     the top of the Properties window; select no banner, no tabs, and no
     form feed; select the PostScript tab at the top of the Properties
     window; click on the Advanced button; if using an external 981
     Ethernet adapter (or similar adapter), make sure that the default
     "Send CTRL+D after job" is selected; click on the OK button to exit
     the ADVANCED POSTSCRIPT OPTIONS window
   - Choose OK in the Properties window.
   - Close Printers.
   - Start the Windows Application and print to the CalComp printer.

3. Windows application programs:
   - Start up Windows application program.
   - Select the Print function from the File menu.
   - If the CCL 600 is not the currently selected printer look for a
     button called Printer or Select printer that provides a means of
     changing printers.

Notes:
   1. The maximum imagable area for various medias sizes are described in
      the Users Guide, pages 3-9 and 3-13.
   2. Some CAD programs may require establishing custom paper sizes.