Win3.x PostScript Driver - CCL600, CCL600ES, CCL1200ES  Serial Port:
Technical Support Hot Line 1-800-CALCOMP (1-800-225-2667)    Updated: 30 April, 1996
                                                      CCL_WINS.DOC
The Windows 3.1 PostScript driver file (CCL-WIN.EXE for the
CCL600/model 80611; CLES-WIN.ZIP for either the CCL600ES/model 84511 or
CCL1200ES/model 85611) may be may be downloaded from the CalComp Website 
(http://www.calcomp.com). The EXE 
file may be self-extracted by typing at the DOS prompt: CCL-WIN.EXE. 
The ZIP file requires PKUNZIP version 2.04G, available from the CalComp BBS 
(file name PKZ204G.EXE).

Hardware Connection Requirements:
  PC Host Computer with a working serial port (i.e. COM1 or COM2).
  Serial, Null modem cable.
  CalComp CCL 600 printer must be connected to a PC directly for this
  configuration.
  Network systems may require different communication parameter settings.

1. Setup CCL600, CCL600ES, CCL1200ES:
   - Power ON the printer.
   - Install (toner) cartridge, see Users Guide, chapter 2.
   - Load media, see Users Guide, pages 3-6 to 3-9.
   - Select paper size, see Users Guide, page 7-30 for CCL600;
     page 6-30 for CCL600ES/CCL1200ES.
   - Select PostScript format or Auto. Note: When Sys = Auto, the
     proper language switch commands may need to be sent to the printer to
     change between PostScript, HP-PCL/5 and HP-GL/2 formats. See Users
     Guide, page 7-20 and 7-48 to 7-49 for CCL600; page 6-20 and 6-48 to
     6-49 for CCL600ES/CCL1200ES.
   - Configure Banding Comp and Page protect, see Users Guide, chapter 7 for
     CCL600; chapter 6 for CCL600ES/CCL1200ES.
     Installed RAM      Banding Comp    Page Protect
      16 MB or more         off             on
      Less than 16 MB       on              off
   - Press ONLINE button to place the printer online (ready to print),
     see Users Guide, page 7-5.

2. Setup Windows Driver:
   - Start up Windows.
   - Double click on Control Panel.
   - Double click on Printers.
   - Highlight CalComp CCL 600 on COMx.
     (If the Windows driver is not installed, Install it now).
   - Choose connect and select the COM port that the plotter is connected to.
   - Choose Settings.
   - Set  Baud Rate = 9600, Data bits = 8, Parity = None, Stop bits = 1,
     Flow control = Hardware.
   - Choose OK.
   - Select Fast Printing Direct to Port.
   - Choose OK
   - Choose Setup.
   - Choose paper size loaded in plotter, and set the orientation.
   - Choose OK in Setup.
   - Choose Set as default printer.
   - Close Printers.
   - Close Control Panel.

3. Windows application programs:
   - Start up Windows application program.
   - Select the Print function from the File menu.
   - If the CCL 600 is not the currently selected printer look for a
     button called Printer or Select printer that provides a means of
     changing printers.  If the application program does not provide a
     method of changing printer, use the Windows Control Panel, Printer
     function to make the CCL 600 the default printer.

Notes:
1. The maximum imagable area for various medias sizes are described in the
   Users Guide, pages 3-9 and 3-13.
2. Some CAD programs may require establishing custom paper sizes.