AutoCAD ADI driver (plpccgui.exe) v6.45 release summary                                                                                                                  

A.  Supported systems

    1.   AutoCAD 12 and 13 for DOS and Windows.

B.  Changes and/or Improvements

    1.   Added support for TechJET 5524 and 5536.

C.  Restrictions

    1.   Color InkJET plotters 53xx require operating system firmware version 1.42 
         or higher for the CDCL functions of the driver.

    2.   Mono InkJET plotters 54xx require operating system firmware version 2.64 
         or higher for the CDCL funtions of this driver.

D.  Known existing bugs

    1.   Installation aborts if a 6.4x version is already installed. 
         Delete PLPCCR64.DLL in the displayed directory prior to installation.

    2.   Using cut sheet, margins are applied to the final output but not to 
         the plot preview.  Users must select roll media and use user defined sizes
         (imageable area).

    3.   Do not use this driver version with AutoCAD 12 for Windows.
         Installing this driver with AutoCAD 12 for Windows then running CCONFIG
         will cause the following message to be displayed:
             NO PLOTTER CONFIGURED
         Corrected version will be available soon.