Setup Win 95 PCI Vector driver with TechJET (55xx)  Parallel Port:
Technical Support Hot Line 1-800-CALCOMP (1-800-225-2667)
Updated: 6 July1998
                                                       
The Windows PCI/907 driver file (WIN95VEC.EXE) may be 
downloaded from the Web Site (http://www.calcomp.com) 
Self-extract the files by typing at the DOS prompt: WIN95VEC
 
Hardware Connection Requirements:

 	o	PC Host Computer with an operational parallel port 
		(i.e. lpt1, lpt2).
  	o	A Centronix cable not greater than 12 feet 
		(CalComp P/N 717960-9 will allow 25 feet).
  	o	CalComp 55xx Plotter must be connected to a PC directly 
		for this configuration.   Network systems, buffer boxes, 
		and/or plot spool programs may require different 
		communication parameter settings.

1. Setup TechJET Color:

	o	Power ON the plotter. Load Media. Press MENU button
	o	Press DOWN arrow key to PROTOCOL and set to PCI.
	 o	Press DOWN arrow key to SYNC # EOM, CHKSUM 
		and set to A: 22, 2, 13, ON.
   	o	Press DOWN arrow key to INPUT RESOLUTION and 
		set to DEFAULT.
   	o	Press DOWN arrow key to ORIENTATION and set to 
		AUTO.
   	o	Press DOWN arrow key to PEN SETUP and set to 
		USE SOFTWARE.
   	o	Press DOWN arrow key to LINE INTERSECT and set to 
		OVERLAY.
   	o	Press DOWN arrow key to EOP TIMER and set to 2 MIN.
   	o	Press DOWN arrow key to STITCH FACTOR and set to 0.
   	o	Press DOWN arrow key to Save as user number and save 
		the settings on USER # (1 to 4).
   	o	Press ONLINE button twice. The plotter should display: 
		ONLINE  000:00.


2. Setup Win95 driver:
   	o	Start up Windows 95.
   	o	Click on the START button, click on SETTINGS, 
		click on Printers.
   	o	Click on the CalComp 907 printer/plotter driver. (If the
     		Windows 95 907/vector driver is not installed, install it 
		now by selecting Add Printer, then Have Disk".  Enter 
		the path that points to the disk directory where the 
		Windows driver is located. Then follow the menu choices, 
		selecting the CalComp 907 printer/plotter driver. If the 
		setup program indicates that the driver already  exists, 
    		 select Replace the Driver. When installation is done, 
		click on the CalComp 907 printer/plotter driver).
   	o	Click on Set as Default from the File Menu Bar in the 
		Printers window.
   	o	Click on Properties from the File Menu Bar in the Printers 
		window.
   	o	Choose Setup.
   	o	Choose the appropriate CCP TechJET 5524 or 5536 model 
		in the Select Printer field.
   	o	Choose paper size loaded in plotter.
   	o	Choose Assign Pens.
   	o	Assign screen colors to pen turret position numbers.
   	o	Choose OK in Pen Assignments.
   	o	Choose OK in Setup.
   	o	Choose OK in the Properties Window.
   	o	Close Printers.
   	o	Start Windows Application and print to the 
		CalComp printer.