1.   Download the CCRF/PS NT (raster-mode) driver from the CalComp 
	Website (http://www.calcomp.com). The file name is:

                 WINNT350.EXE for Windows NT 3.5

           	 NT351X86.EXE for Win NT 3.51 on a PC/compatable
                          for installing driver from hard disk.

                 NT351D86.EXE  for Win NT 3.51 on a PC/compatable
                          for installing driver from floppy diskette.

            NT40X86.EXE   for Win NT 4.0 on a PC/compatable
                          for installing driver from hard disk.

            NT40D86.EXE   for Win NT 4.0 on a PC/compatable
                          for installing driver from floppy diskette.

            NT40AL.EXE    for Win NT 4.0 on DEC/Alpha.

       
                 The file is self-extracting. Simply download the appropriate file, 
                  type the filename to extract the driver files and 
                  documentation.  The files should be extracted to an 
                  empty directory on the hard drive.

Start Windows NT.

                  i.    Install the driver via Print Manager, as described in 
                        the README.TXT file.
     
                  ii.   When the setup program has completed, the driver will 
                        be installed.
            
            c.    Set up the plotter.
                  
                  i.    On the plotter, press the MENU button until the
                        plotter displays: MENU - USE ARROW KEYS TO CHANGE.
                  
                  ii.   Press the down arrow keys until the plotter displays:
                        PROTOCOL. Press the right (+) key until the plotter
                        displays CCRF.
                  
                  iii.  Press the down arrow keys until the plotter displays:
                        INPUT RESOLUTION. Press the right (+) key until the
                        plotter displays 360.
                  
                  iv.   Press the down arrow keys until the plotter displays:
                        EOP TIMER. Press the right (+) key until the plotter
                        displays DISABLED.
                  
                  v.    Press the down arrow keys until the plotter displays:
                        INPUT BUFFER. Press the right (+) key until the
                        plotter displays 100K.
                  
                  vi.   Press the down arrow keys until the plotter displays:
                        SAVE AS USER. Press the right (+) key until the
                        plotter displays either 1, 2, 3, or 4.
                  
                  vii.  Press the down arrow key once. When the plotter
                        display changes, the plotter is set up. Load
                        the media into the plotter and press ON LINE.