The Demonstration (Demo) plot is an internally-stored program in the 
      plotter that is performed to demonstrate that the plotter is properly 
      functioning. Perform the following:

      1.    Turn the plotter power on.

      2.    Install pens into the turret and place the turret in the plotter.

      3.    Insert media into plotter and lower pinch rollers.

      4.    Press the ON LINE key to load/size the media.

      5.    When the plotter displays ONLINE, press the ON LINE key.
            The plotter will display: MANUAL. 

      6.    Press the MENU key. Press the Up Arrow key until the plotter 
            displays: INTERNAL PLOT: OFF

      7.    Press the Right Arrow key until the plotter displays 
            DEMONSTRATION.

      8.    Press the ON LINE key.  The plotter will display: ONLINE

      9.    The Demonstration Plot will start to be plotted.