WIN3.x CCRF Raster driver with DrawingMaster 53x36 Parallel Port:
Technical Support Hot Line (800) CALCOMP (1-800-225-2667)
             Updated: 3 May, 1996
                                                      53XWCRFP.DOC
The Windows CCRF/PS driver file (WIN31DRV.EXE), may be downloaded 
from the CalComp Website (http://www.calcomp.com). 
Self-extract the file by typing at the DOS prompt: WIN31DRV

Hardware Connection Requirements:
  PC Host Computer with an operational parallel port (i.e. LPT1, LPT2).
  Parallel cable, Centronics connector, double shielded cable.
  CalComp 53X36 Plotter must be connected to a PC directly for this
  configuration.  Network systems, serial buffer boxes, and/or plot
  spool programs may require different communication parameter
  settings.
  Serial communication is not recommended with CCRF format.
  
1. Setup 53336, 53436 Plotter:
   - Turn plotter on, when Online appears on the LCD plotter is ready.
   - Press the Scroll key until More Options is displayed. Press the
     Select key.
   - Press the Scroll key until Port Setup is displayed. Press the Select key.
   - Press the Scroll key until PAR_1, (or desired COM) is displayed.
     Press Select key.
   - Press the Scroll key until Input Mode is displayed. Press the Select key.
   - Press the Scroll key until Buffered Mode is displayed. Press the
     Select key.
   - Press the Scroll key until Dead Job Time is displayed. Press the
     Select key.
   - Press the Scroll key until 60 sec is displayed. Press the Select key.
   - Press the Scroll key until Dead Job Action is displayed. Press
     the Select key.
   - Press the Scroll key until Force is displayed. Press the Select key.
   - Press the Scroll key until Interface Type is displayed. Press the
     Select key.
   - Press the Scroll key until Centronics is displayed. Press the Select key.
   - Press the Scroll key until Exit Select Port is displayed. Press
     the Select key.
   - Press the Scroll key until Exit Port Setup is displayed. Press
     the Select key.
   - Press the Scroll key until Save to User # is displayed. Press the
     Select key.
   - Press the Scroll key until 1 is displayed, or the user # you wish
     to use (1-10). Press the Select key.
   - Press the Scroll key until Exit to Main Menu is displayed. Press
     the Select key.
   - Press the Scroll key until Online is displayed. Press the Select key.
 

2. Setup Windows driver:
   - Start up Windows.
   - Double click on Control Panel.  Double click on Printers.
   - Highlight the appropriate CCP DrawingMaster+ 53x36 driver. (If
     the Windows CCRF/PS Raster driver is not installed, install it now by
     selecting RUN from the File menu bar in Program Manager and selecting
     the SETUP.EXE file from the disk directory where the Windows driver is
     located. Then follow the menu choices, selecting the appropriate
     DrawingMaster+ 53x36 raster-mode plotter driver. When done, double
     click on Control Panel, double click on Printers, and select the driver).
   - Choose connect and select the LPT port that the plotter is connected to.
     (Default = LPT1).
   - Choose Fast Print Direct to Port.
   - Choose OK.
   - Choose Setup.
   - Choose Paper Size:  D size sheet (or as desired).
   - Choose Paper Source:  Not Applicable.
   - Choose Orientation:  Landscape (or as desired).
   - Choose Set as default printer.
   - Make sure Use Print Manager is NOT selected.
   - Close printers.   Close Control Panel.
   - Start Windows Application and print to CalComp DrawingMaster+ 53x36
     plotter.