How to install/use the ColorMaster Plus 6603XF/6613XF Windows Driver.

A.    Use the ColorMaster Plus 6603XF/6613XF Windows Driver.

      1.    In Windows, from Program Manager: double-click on Main, double-
            click on Control Panel, double-click on Printers.

      2.    Windows will display the Printers dialog box.  From the list of
            installed printers, select the CalComp ColorMaster Plus
            6603XF/6613XF Windows Driver. If the driver is not listed, then
            the driver is not installed. Install the driver, as described
            below:

            a.    Place the CalComp ColorMaster Plus Installation diskette
                  into the floppy drive, A: or B:.

            b.    Click on the button: Add.

            c.    A menu will highlight: Install Unlisted or Updated Printer.
                  Click on the button: Install. Type the correct drive that
                  the diskette was installed (A:\   or B:\) and click on
                  button: OK.

            d.    The Add Unlisted or Updated Printer dialogue box appears
                  with the printer CalComp ColorMaster Plus 6603XF/6613XF
                  selections listed. Click on the appropriate driver. Click
                  on the button: OK.

            e.    When the driver has finished installing, Windows returns to
                  the Printers dialog box.

      3.    Click on the button: Set As Default Printer.

            Make sure that there is no X in the box that says: Use Print
            Manager.

      4.    Click on the button: Connect. Set the Transmission Retry value to
            720. Click on the button: OK.

      5.    Click on the button: Setup. Select the appropriate paper size and
            paper source.

      6.    Click on the button: OK. Close Printers. Close the Control Panel.

      7.    Start the Windows application.

      8.    Bring up a test file for printing and submit the print job.