NOTE:  For Technical Support with any of the products contained on this page, please call one of the following:

For U.S./Canadian technical support/service, please call the CalGraph Call Center at 1-714-578-9292.

Pacesetter Pen Plotter Models: 2024 and 2036

Software and Setup Notes

What driver to use for your system or application

Setup AutoCAD 9, 10, and 11 - Serial port

Setup AutoCAD 9, 10, and 11 - Parallel port

Setup AutoCAD 12 and 13 - Serial port

Setup AutoCAD 12 and 13 - Parallel port

Setup Generic Cad - Serial port

Setup Generic Cad - Parallel port

Setup Windows 3.1 907/PCI Driver - Serial port

Setup Windows 3.1 907/PCI Driver - Parallel port

Setup Windows 95 907/PCI Driver - Serial port

Setup Windows 95 907/PCI Driver - Parallel port

Troubleshooting

Pens are leaking

Pens are skipping, dragging, or not touching the media

Media slipping (Plotter is not holding the media securely)

Plotter makes a grinding noise

Missing data; Loss of origin; Plotted entities shift; Media slipping

Plotter keeps feeding paper, Fan runs with no media in plotter

Plotter does not size media, Fan will not turn on with media loaded

Plots are clipped

Not communicating; Plotter displays: COMMUNICATION ERROR

Plotter displays: REMOVE RETICLE OR PEN FROM CARRIAGE

Plotter displays: PLEASE CHECK CARRIAGE/TURRET!

Plotter displays: PLEASE CHECK DRUM/MEDIA

Plotter displays: 907/PCI/CCGL COMMAND ERROR

General Notes

Common part numbers

Running a Demonstration Plot

Cable Requirements, Pin-outs

Cut Sheet media sizes

PCI Configuration Parameters table

Network Information