Large Format Plotter/Printer Files

Filename Size Date Description of File Contents

255ACAD.ZIP 30150 08-02-95 255 pen and 255 polyline DWG test files for AutoCAD r12 and CalComp Electrostatic, DrawingMaster and TechJET Designer plotters.

420ADOB1.EXE 1,211,764 01-14-99 Raster Driver Modified for Adobe Postscript Driver Updated 13 Jan 1999
Needed for Autocad 14 with Windows 95 raster only. The Calcomp ADI driver is vector only and will not do raster images.
This driver is the same as 95NT40_1.EXE except it is modified to load in the Adobe 4.2.x, APS4ENG.exe, (downloaded from internet) driver and use it instead of the Win95 Postscript driver. This is usually only needed to correct a problem using the system printer driver in Autocad 14 to do large raster images. This only happens under Win95 not Nt 4.0. The readme file contains the location on the internet where you can download the Adobe driver.
95NT40_2.EXE is also needed which contains the fonts.
95NT40_3.EXE is also needed if you have a color capable model.
If you are using NT40, then you need the file CCLEANNT.EXE.

55_182.EXE 360520 05-27-97 TechJET 5500: Models 5524S/5536S/5536 GA. Flash ROM firmware v1.82 without PostScript.

55_182PS.EXE 1370719 05-27-97 TechJET 5500: Models 5524/5536/5536 GA PLUS. Flash ROM firmware v1.82 with internal PostScript capability.

720c_180.EXE 330590 05-12--97 TechJET Designer 720c Model 5624/5636 flash ROM firmware upgrade for non-postscript plotters v1.80

720c_18P.EXE 1401626 05-12-97 TechJET Designer 720c Model 5624/5636 flash ROM firmware upgrade for postscript plotters v 1.80

95NT4_1.EXE   1,207,550 7-28-99 DISK 1 OF 3   Raster Driver for Windows 95/98 & NT4.0 Version 4.20 (released)
Calcomp plotter/printer raster/Postscript driver. Not for pen plotters.
Installation instructions  are in the readme. Color plotters/printers will need all 3 files, monochrome only the 1st 2. Execute files and just choose unzip and it will create a subdirectory ccp with readme. Following subdirectories containing the driver files will also be created, disk1,disk2, and disk3 if color device. When you execute you will have the option of specifying an alternate directory to ccp. 

Modified 7-28-99 to use inf file Win98setup.inf for Win98 and Ccrsetup.inf for Win95/Nt 4.0.

Modified 7-02-99 to install under Win98 2nd edition.

Note: NT Users Only: You should also download and use the file CCLEANNT.EXE.

Note: Win95/98 Users Only: You should also download CCLEAN95.EXE to remove previous Calcomp drivers.

95NT4_2.EXE   1,201,611 1-13-99 Disk 2 of 3.  Fonts disk, required for all CalComp raster printer/plotters.  Is the companion to 95NT4_1.EXE.

95NT4_3.EXE    955,671  1-13-99  Disk 3 of 3.  Color profiles, required only if your printer is a Color printer.

ACADCLRP.ZIP 19230 05-22-90 Color palette plot file configured for AutoCAD setup.

BATCH25.ZIP 78096 12-16-92 Batchplot ver 2.5 saves drawing file configs and supports ISO sizes with metric values. Executable update only - requires support files in CALPROGS.ZIP.

CALPROGS.ZIP 271230 12-16-92 Real and protected mode ADI drivers and Batchplot ver 2.5. Includes network setup info. For AutoCAD 10 & 11 - not recommended for AutoCAD 12.

CALUTILS.ZIP 101018 06-23-94 CalComp plot file utilities. Includes a CalComp to ascii DXF converter, a CalComp to binary DXF converter and a CalComp to VGA viewer. Shareware.

CCLEAN95.EXE 35Kb 03-10-99 Recommended to run prior to updating Calcomp drivers in Windows 95/98. Used to remove previous Calcomp drivers. Has been tested with 4.12 version and later Calcomp drivers. Works in Win95/Win98. This will remove all instances of Calcomp printers/plotters, it is not selective. Run Cclean95.exe and after self extracting read the cclnread.txt file for more info and instructions.

CCLEANNT.EXE 54,230  04-23-99  Recommended to run prior to updating Calcomp driver in NT 4.0. Used to remove previous installed Calcomp drivers version 5.0 and the current 95/NT4.0 version 4.20. It is not selective and will remove all Calcomp devices except CCl600. Run Ccleannt.exe and it will extract to ccp subdirectory. Run the Calcomp Remove NT executable and it will request a reboot. After the reboot the Calcomp printers should be gone and the installed files also.
Modified on 4/23 to remove V5.00 Drawingmaster 600/800 registry entries and now will not affect PCL printers already installed.

CCRF2IL.EXE 25393 09-13-96 'C' program source code to convert plane-by-plane CCRF data (used by CalComp color electrostatic color plotters) to the line-by-line interleaved CCRF color data (used by CalComp color inkjet plotters).

CCRFWIN.ZIP 429810 01-11-95 Windows raster mode (CCRF) driver for CalComp raster plotters. Extract to floppy and run SETUP from the Windows Program Manager. Does NOT support color electrostatic plotters. Provides eight colors and grayscale output.

CDCL_12.ZIP 61278 03-06-91 CalComp Device Control Language setup program - ver 1.2.

CLRPLT.ZIP 20235 09-14-89 CalComp default color palette plot file.

CLRWHEEL.CCR 103474 06-18-96 CCRF test file for 68000. Outputs A-size color wheel.

DECODE.ZIP 33772 09-11-89 907/PCI plot data analyzer - v3.03.

DEMO600.ZIP 893158 06-27-94 DrawingMaster 600 demo raster plot file.

DEMO800.ZIP 1270110 06-27-94 DrawingMaster 800 demo raster plot file.

DEMOPAGE.EXE   Sends a PostScript Demopage to a designated output port.

DMPLS108.ZIP 430830 08-03-95 DrawingMaster 600/800 user upgrade - v1.08.

ECG_DSK1.HQX   Adobe PostScript printer driver for use with Macintosh.  This upgrade includes Easy-to-use PPD installation control panel; Advanced tab-style user interface;  N-up printing allowing multiple pages to print on a single physical page; Watermarks allowing you to define and add text to the foreground or background of most documents; PostScript monitor for bi-directional printers, providing on-screen job and printer status  This file must be accompanied by the file ECG_DSK2.HQX for successful installation.

ECG_DSK2.HQX     Part 2 of the Macintosh Adobe PostScript driver

ESPITFIR.ZIP 9918119 01-12-95 TechJET Color demo plot file (CCRF).

EPPACAD.ZIP 628 11-02-88 EPP initialization code.

FASTPLOT.ZIP 19968 05-09-90 Transfer plot files using xon/xoff or hardware flow control.

GA165FW.EXE 729240 07-11-96 TechJET Color Model 175i (5336i) flash ROM firmware upgrade - v1.65 (without internal PostScript capability). For complete instructions, refer to FaxBack (714/821-2914) Doc 4020.

GRID_C.PS 663 04-01-97 53436EG EcoGrafix: Grid plot 42", single line 1 inch grid. PostScript format.

GRID_C01.PS 1238 04-01-97 53436EG EcoGrafix: Grid density plot 42" 95% density. PostScript format.

GT160FW.EXE 742563 04-05-96 TechJET Color Model 5324/5336/5336GT flash ROM firmware upgrade - v1.60 for NON-PostScript plotters. For complete instructions, refer to FaxBack (714/821-2914) Document # 4020.

GTP160FW.EXE 815361 04-05-96 TechJET Color Model 5324/5336/5336 GT/PS flash ROM firmware upgrade - v1:60p for plotters with PostScript option. For complete instructions, refer to FaxBack (714/821-2914) Document # 4020.

HCRS.ZIP 27480 04-10-92 HCRS source code in "C".

HPGL2PCI.ZIP 51851 10-15-91 HPGL to PCI coversion program - ver 1.22.

INDEX.ACD 10 11-02-88 Advance paper on roll mode plotter.

KDECODE.ZIP 28038 08-30-94 CCRF decode program v2.22. Includes sample plot and "C" source code.

LINE.ZIP 705823 01-12-95 TechJET Color demo plot files (907/PCI & HPGL).

MARGIN.ZIP 24922 02-03-93 Margin v1.0 - Program to draw border around media to show max plotting area. Uses HPGL.

MX1_65P.EXE 981888 07-11-96 TechJET Color Model 175i MX (5336iMX) flash ROM firmware upgrade - v1:65p (internal PostScript capability). For complete instructions, refer to FaxBack (714/821-2914) Doc 4020.

NETWORK.ZIP 4004 03-27-92 Network plot spooling setup info for AutoCAD.

NEWSYNC.ZIP 43749 02-06-91 Change sync, eom, chksum, & add search addresses in plot data files.

NT351D86.EXE 2433674 06-25-97 CalComp plotter/printer driver release 5.0 for Windows NT3.51. To expand, save to an empty folder, then type: nt351d86 . Creates disk1, disk2, disk3 folders.

NT351X86.EXE 2420992 06-25-97 CalComp plotter/printer driver release 5.0 for Windows NT351. To expand, save to empty folder, then type nt351x86

NT40AL.EXE 2638983 06-17-97 CalComp plotter/printer driver release 5.0 for Windows NT 4.0 DEC ALPHA. To expand, type: NT40AL -d Creates disk1, disk2 and disk3 folders. Do not attempt to install this driver on a Pentium-based, or 486-based computer.

PAUSE.ACD 10 11-02-88 Put pen plotter in manual mode.

PLOTWARE.ZIP 253498 06-23-93 PlotWare v1.10 - Setup program for the CalComp DesignMate plotter.

PLPCAL.EXE 429116 03-16-95 Shareware - Enhanced ADI driver for CalComp raster plotters. Features include flood filling complex polygons, color layering, I.D. banners, user definable colors/dithers. DOS/Win R12&R13/Sun v1.27.

PLPCC655.EXE 323332 07-10-97 AutoCAD ADI Driver v6.55 with GUI interface. For ACAD12, 13, & 14 (DOS, Win 3.1x/95/NT). For pen plotters, use either PLPCCDOS.EXE or PLPCCWIN.EXE.

PLPCCDOS.EXE 49765 10-31-96 PLPCC.EXP v5.6 - CalComp ADI plotter driver for AutoCAD r12 & r13 (DOS). This driver is best for all CalComp pen plotters. Refer to the README.BAT file for documentation.

PLPCCWIN.EXE 85802 10-31-96 CalComp ADI plotter drivers (v5.6) for AutoCAD r12 & r13 (Windows & NT). Refer to the README.BAT file for documentation. This driver is best for all CalComp pen plotters.

SL4_OPCM.EXE 23135 08-27-96 Addendum to Solus-4 Reference Manual. Document includes new Opcom commands and features that were added to 54424/Rev 3.31/3.40 &54436/Rev 1.21& 1.23 (e.g., EQM, Raster Rotate, Elec. Collate, etc). This is a self-extracting zip file.

SOFT.ZIP 5977 02-21-92 CalComp software catalog (HCBS).

SPIRIT2A.ZIP 10257831 01-12-95 TechJET Color demo plot file (CCRF).

TESTPLOT.ZIP 17203 08-29-95 Provides 3 small plot files for testing the plotter for basic communication. Unzip the file, then run TESTPLOT.BAT and follow the instructions.

TJC5324.PPD 14699 PostScript Printer Description file for 24 inch TechJET Cutsheet Mode Color Printer (note: if your browser refuses to download this file, try pressing the "shift" key as you click on the underlined file name.)

TJC5324R.PPD 14762 PostScript Printer Description file for 24 inch TechJET Roll Mode Color Printer (note: if your browser refuses to download this file, try pressing the "shift" key as you click on the underlined file name.)

TJC5336.PPD 15367 PostScript Printer Description file for 36 inch TechJET Cutsheet Mode Color Printer (note: if your browser refuses to download this file, try pressing the "shift" key as you click on the underlined file name.)

TJC5336R.PPD 15311 PostScript Printer Description file for 36 inch TechJET Roll Mode Color Printer (note: if your browser refuses to download this file, try pressing the "shift" key as you click on the underlined file name.)

TJG5324.PPD   14748 PostScript Printer Description file for 24 inch TechJET GT Cutsheet Mode   Color Printer (note: if your browser refuses to download this file, try pressing the "shift" key as you click on the underlined file name.)

TJG5324R.PPD   14699 PostScript Printer Description file for 24 inch TechJET GT Roll Mode   Color Printer (note: if your browser refuses to download this file, try pressing the "shift" key as you click on the underlined file name.)

TJG5336.PPD   15299 PostScript Printer Description file for 36 inch TechJET GT Cutsheet Mode   Color Printer (note: if your browser refuses to download this file, try pressing the "shift" key as you click on the underlined file name.)

TJG5336R.PPD 15254 PostScript Printer Description file for 36 inch TechJET GT Roll Mode  Color Printer (note: if your browser refuses to download this file, try pressing the "shift" key as you click on the underlined file name.)

USGS.ZIP 5605370 01-12-95 TechJET Color demo plot files (CCRF).

VIEWPLOT.EXE 173916 11-30-95 PCI/907 plot file viewer and plot manager. Also supports HPGL, HPGL/2, and DM/PL. Shareware - demo version.

WIN31DRV.EXE 1349213 12-20-96 Windows 3.x drivers for all CalComp plotters- v4.13 (Setup). Contains: CCRF/PostScript v4.50 and 907/PCI v7.38 drivers. After extracting, run SETUP from Program Manager to install. Installation instructions are in file: README1.TXT

WIN95VEC.EXE 177855 07-21-97 Windows 95 driver for pen plotters. Also very good for all plotters running CAD applications. (7-21-97) Contains 907 driver v7.38

WINNT350.EXE 465829 11-14-95 Windows NT 3.5 drivers (v1.2) for color & mono inkjet plotters, raster plotters, and PostScript printers. Does NOT support color electrostatic plotters (68000 and 58000).

WN31INST.EXE    894430  5/9/97     Windows 3.1 driver S/W to support latest 53436EG Nesting S/W changes. THIS DRIVER MUST BE LOADED AND USED TOGETHER WITH 53436EG V1.11 AND ADOBE RIP CODE V18.

WN95INST.EXE    28749   12/11/97     Windows 95 driver S/W to support latest nesting changes for 53436EG. THIS DRIVER MUST BE INSTALLED AND USED TOGETHER WITH ADOBE RIP CODE V18 AND 53436EG S/W V1.11.