A.    The plotter is set for roll feed mode. Change the media handling from
      roll media to cut sheet. Perform the following:
      
      1.    Remove the media from the plotter.
      
      2.    Press the MENU button on the plotter until the plotter displays:
            MENU - USE ARROW KEYS TO CHANGE.
      
      3.    Press the down arrow key until the plotter displays: MEDIA
            HANDLING:
      
      4.    Press the right (+) key until the plotter displays: CUT SHEET.
      
      5.    Press the down arrow keys until the plotter displays: SAVE AS
            USER. Press the right (+) key until the plotter displays either
            1, 2, 3, or 4.
      
      6.    Press the down arrow key once. When the plotter display
            changes, the plotter is set up. Load the media into the
            plotter and press the ON LINE button twice.